Micron Cartridge Filters
Britannic supplies SS304/SS316/316L/UPVC constructed housing cartridge filters which widely used to remove tiny particles like sediments silt etc... In many filtering applications, a choice between the use cartridge filter has to be made. Both are sediments filters, that is to say they reduce the amount of sediments transported by the fluid trough filtration.
There are some differences between these two filter systems:
- The choice of cartridge filter depends on the application. Cartridge filters are preferable for systems with contaminations lower than 100 ppm, that is to say with contamination levels lower than 0.01% in weight. Cartridge filter can be surface or depth-type filter: depth-type filters capture particles and contaminant through the total thickness of the medium, while in surface filters (that are usually made of thin materials like papers, woven wire, cloths) particles are blocked on the surface of the filter.
- Surface filters are best if you are filtering sediment of similar-sized particles. If all particles are i.e. five micron, a pleated 5-micron filter works best because it has more surface area than other filters. Compared with pleated surface filters, depth filters have a limited surface area, but they have the advantage of depth.
- It can be generally stated that if the size of filter surface is increased, higher flows are possible, the filter last longer, and the dirt holding capacity increases. Cartridge filters are normally designed disposable: this means that they have to be replaced when the filter is clogged.
Typical Applications:
Used for potable water treatment, municipal water filtration etc… Widely used in hotels, restaurants, food & beverages etc…